The University of Belgrade. Faculty of Mechanical Engineering.

Mechanical Engineering

The Faculty of Mechanical Engineering University of Belgrade (UB-FME) systematically and effectively plans, carries out, supervises, evaluates and upgrades the quality of its study programme in mechanical engineering at Bachelor of Science (BSc) level.

The BSc (undergraduate) study programme in mechanical engineering lasts three years of study with 180 ECTS and fully complies with the basic tasks and objectives in mechanical engineering.

Goals

Applying the acquired knowledge and methods in order to solve the given tasks within the chosen field. The task refers to studying the problem, its structure and complexity, and coming up with adequate solutions. The student acquires knowledge on the manner, structure and form of writing a projectreport which refers to the activities undertaken within the given topic of the Final course. The student acquires the adequate level of knowledge, skills and competences referring to the problem field, implemented methods and obtained results. The student also acquires the ability to publicly present the results of independent work, organised in an appropriate form.
home-dev-image-box-03

Learning outcomes

Upon the successful completion of this course, students should be able to...
Learn more
home-dev-image-box-02

Theoretical teaching

It is developed individually in accordance with the related field of the topic of the Final course.
Learn more
home-dev-image-box-01

Practical teaching

Practical teaching contents refer to the implementation of the acquired knowledge ...
Learn more
1st level of studies

B.Sc. (undergraduate) Academic Studies

Mechanical Engineering, ECTS 180

1st year
2nd year
3rd year
1st semester
2nd semester

Legend

Legend: white boxes – obligatory courses, coloured boxes – elective courses. Skill praxis B lasts for 90 hours and it is worth 3 ECTS; B.Sc. work – as all other courses, however, knowledge check is done through the project or seminar work.
If the courses are held in blocks, a course with 3 teaching hours is worth 4 ECTS credits, and a course with 2 teaching hours is worth 2 ECTS credits. After the completion of classes, for the courses of the smaller block, special exam periods are organised in which only exams in these courses can be taken. The exams in the courses of the larger block can be taken for the first time in the final semester exam period (January, June).
For reference, the courses are coded according to their position:
1. the first digit is the number of the semester (vertical, column);
2. the second digit is the number of the full-course box in a semester (horizontal, row);
3. the third digit is the number of weekly hours.

Learning outcomes of the Bachelor study programme in
Mechanical Engineering

The Faculty of Mechanical Engineering University of Belgrade (UB-FME) systematically and effectively plans, carries out, supervises, evaluates and upgrades the quality of its study programme in mechanical engineering at Bachelor of Science (BSc) level.
The BSc (undergraduate) study programme in mechanical engineering lasts three years of study with 180 ECTS and fully complies with the basic tasks and objectives in mechanical engineering.
Following the EUR-ACE framework standards of engineering programmes , the qualifications which students get when they complete UB-FME BSc studies are -->
1. Knowledge and Understanding

1. Knowledge and Understanding

a. Broad and sound knowledge in mathematics, science and engineering, enabling to understand the complex phenomena peculiar to mechanical engineering. Bachelors will have the ability to demonstrate sound knowledge and understanding of the basics of fundamental and engineering sciences, such as:

    • Mathematics, including differential and integral calculus, linear algebra, numerical methods, programming and computational tools;
    • Mechanics, solid and fluid, thermodynamics, as well as physics and measurements;
    • Material science and strength of materials, with machine elements and manufacturing technology;
    • Electrical and control engineering;
    • Elements of general operation of common machines: engines, vehicles, pumps, fans, turbines, tractors, material handling machines, etc. for which courses are elective;

b. Understanding broader multi-disciplinary context of engineering;

c. Interpreting and critically assessing existing theories, models, methods and results, both qualitatively and quantitatively, within a broad engineering and physical science framework;

d. Ability to work in a subject specific field of a company and be a specialist to some extent.

2. Engineering Analysis

2. Engineering Analysis

a. Ability to identify, abstract, formulate, and solve engineering problems in their complexity with an orientation on the fundamentals;

b. Ability to apply, analyse and assess products, processes and methods based on the system technology;

c. Ability to choose, apply and develop suitable methods for analysing, modelling, simulating, and optimizing;

d. Capacity for analysis and synthesis.

3. Engineering Design

3. Engineering Design

a. Ability to design a system, component, or process to meet the desired needs within realistic constraints such as economic, environmental, social, political, ethical, health and safety, manufacturability, and sustainability;

b. Understanding the design methods and the ability to apply and further develop them.

4. Investigations and Assessment

4. Investigations and Assessment

a. Ability to design and conduct experiments, as well as to analyse and interpret data;

b. Capability to use technical literature and other information sources, as well as to find information that is relevant using search engines, online libraries and repositories. Ability to effectively utilize modern information resources and technologies.

5. Engineering Practice

5. Engineering Practice

a. Ability to combine theory and practice in solving engineering problems, as well as to apply knowledge in practice;

b. Understanding the limits of applicable techniques and methods, making choices based on reasoned arguments, comparing techniques and methods, contrasting them with one another and evaluating the outcomes of those choices by comparing them with alternative solutions;

c. Understanding the health, safety and legal issues and the impact of engineering solutions on the society and the environment, commitment to professional ethics, and acting responsibly and in line with the norms of engineering practice;

d. The broad education necessary to understand the impact of engineering solutions in a global, economic, environmental, and societal context; awareness of the non-technical effects of engineering activities.

 

6. Transferable Skills

6. Transferable Skills

a. Ability to function as an individual and as a member of multidisciplinary teams;

b. Ability to work independently;

c. Ability to communicate effectively (orally – students apply the correct technical style and format appropriate for the audience, as well as in the written form – students use appropriate graphical standards in written and oral communication) with the engineering community and society, including general audience;

d. Discussing ethical issues in research work with their peers in an informed and reasoned fashion;

e. Knowledge of project management and business practices;

f. Ability to use and evaluate tools for analysing a company in its environment;

g. Capability to be prepared for decision making at mainly operational and tactical levels;

h. A recognition of the need for and an ability to engage in life-long learning;

i. Ability to work and communicate in the national and international context;

j. Continue studies within this field towards an advanced degree, i.e. at the MSc level, having developed the necessary personal autonomy and knowledge to do so.

Schedule of lessons and lecture attendance

1st year 2nd year Monday Tuesday Wednesday Thursday Friday
8.00-8.45 14.00-14.45 1st class hour Course 1 Course 2 Course 3 Course 4 Course 5
Break
9.00-9.45 15.00-15.45 2nd class hour Course 1 Course 2 Course 3 Course 4 Course 5
Break
10.00-10.45 16.00-16.45 3rd class hour Course 1 Course 2 Course 3 Course 4 Course 5
Break
11.00-11.45 17.00-17.45 4th class hour Course 1 Course 2 Course 3 Course 4 Course 5
Break
12.00-12.45 18.00-18.45 5th class hour Course 1 Course 2 Course 3 Course 4 Course 5
It is mandatory for students to attend classes, as well as for the teachers to keep attendance records. Demonstration/testing of knowledge in classes is mandatory as a form of acquiring pre-exam points. In such a way, parts of the exam are taken during the semester, and only the remaining points are earned in the final exam. Students must take the final exam even if they do not want to receive the remaining points.
The maximum number of students enrolled into the study programme of Bachelor Academic Studies – Mechanical Engineering is 720, and classes are held in groups of a maximum of 180 students for lectures, 60 for general exercises and 20 students for laboratory exercises .

Elective courses

At the end of the first semester, as well as when enrolling in the 2nd and 3rd year of studies, students choose the courses for that particular year of studies which they want to attend and pass exams in. For each semester, as well as for each course position in the semester, there is a separate elective list. With that respect, the following conditions must be taken into account:
1 2 3 4 5 6
           
           
          6.3
      4.4 5.4 6.4
    3.5   5.5 6.5
  4.5  
A student can choose only one of the elective courses that are included in the list for the given position. When choosing a course, the student needs to check the attendance requirements for each individual course. Classes in an elective course will be held only if a minimum of 5 students enroll in the course. Students who have a higher average grade have the priority when choosing a particular course. Each department can offer a course that they believe students will be interested in. A student has the right to enroll in any module (specialization) at Master studies. A module represents a group of courses that are interconnected and must all be attended when that module is chosen. For some modules, there are recommended elective courses from the level of Bachelor academic studies.
The course "Skill Praxis B"(hereinafter: Skill Praxis) forms an integral part of the teaching process at the level of Bachelor academic studies at the Faculty of Mechanical Engineering, University of Belgrade and it is defined by the Rulebook on Skill Praxis. The student of Bachelor academic studies is referred to skill praxis in order to enrich theoretical and academic knowledge and gain practical knowledge and experience necessary for engaging in professional engineering activities.
Skill praxis may be performed with one or more legal entities, whose activity is in accordance with the study programme and with which the Faculty has signed a cooperation agreement. The student is referred to the skill praxis in the duration and periods defined by the study programme. The minimum number of hours of professional practice is 90 hours per year. Out of that, 80 hours or 10 days are envisaged for conducting skill praxis, while 10 hours are reserved for writing a report and defending it. Skill praxis is not included in the planned teaching load of the current academic year, but it does carry ECTS points. The Vice Dean for Teaching is in charge of planning the skill praxis, while the Skill Praxis Coordinator is in charge of its organization and implementation. During skill praxis, the student is obliged to keep a Skill Praxis Diary. This document should include the date and place of the conducted skill praxis, the duration of skill praxis and the work tasks encompassed by skill praxis. Upon completion of Skill Praxis B, the student is obliged to submit the Skill Praxis Diary and the Certificate of the completed skill praxis to the Skill Praxis Coordinator. During the skill praxis, the student is obliged to comply with the prescribed work and safety measures of the legal entity in which skill praxis is performed.
1st level of studies

B.Sc. (undergraduate) Academic Studies

Mechanical Engineering
UB FME Booklet

Click to see ub-fme-booklet.pdf

Academic Studies GUIDE B.Sc., M.Sc., Ph.D.

Click to see Guide_to_Studies.pdf

Mechanical Engineering
B.Sc. Course Catalog

Click to see course_catalog_BSC.pdf

Goals and Learning Outcomes of Bachelor Studies

Click to see asiin_osnovne.pdf

We're here to help

Our Faculty team is here for you to help you through the process and your course creation needs.

Contact us

General Info

Editor

Boško Rašuo 
University of Belgrade

Associate Editor

Stevanović Vladimir
University of Belgrade

Technical Editor

Sedmak Simon
University of Belgrade

Editorial Board

Click o see editorial_board.pdf

List of Reviewers

Click to see list_of_reviewers.pdf

Email

fme-transactions@mas.bg.ac.rs

On line service

http://www.mas.bg.ac.rs/transactions

Template for manuscript

Click o see template_for_manuscript.pdf

Manuscript Submission Guidelines

Click to see guide_for_the_autors.pdf
From the Editor

I’m pleased to say that the FME Transactions journal has been accepted for indexing in ESCI (Emerging Sources Citation Index).

This means that the journal will now be discoverable via the Web of Science database, alongside any other Web of Science indexed journals. From the Web of Science database, we are now able to see full citation counts, author information and other enrichment on the journal. Articles in ESCI indexed journals will be included in an author’s H-Index calculation.

Being ESCI listed is the first step to obtaining an Impact Factor. We will be able to analyse the data provided by Web of Science to give a more detailed understanding of the journal’s citation performance, and apply for an Impact Factor listing as soon as we are confident that citations are at a level high enough to be accepted by the Science Citation Index (SCI).

ESCI listing should act as a significant incentive for submitting authors, and so please share the news with your networks!

Publishing Ethics & Policy

The journal FME Transactions follows ethics norms accepted by international scientific community. It makes all efforts to prevent any infringements of the norms. This publication ethics statement, based on guidelines and standards developed by the Committee on Publication Ethics (COPE), includes respective responsibilities of authors, reviewers, and editors. The FME Transactions does not charge any manuscript processing and/or publishing fees.

Digital copies of the journal are archived in the Digital Repository of the National Library of Serbia.

The journal FME Transactions follows ethics norms accepted by international scientific community. It makes all efforts to prevent any infringements of the norms. This publication ethics statement, based on guidelines and standards developed by the Committee on Publication Ethics (COPE), includes respective responsibilities of authors, reviewers, and editors. The FME Transactions does not charge any manuscript processing and/or publishing fees.

Digital copies of the journal are archived in the Digital Repository of the National Library of Serbia.

Editorial Responsibilities

The Editor is responsible for deciding which articles submitted to the FME Transactions will be published. The Editor is guided by the policies of the journal’s Editorial Board and constrained by legal requirements in force regarding libel, copyright infringement and plagiarism.

The Editor must hold no conflict of interest with regard to the articles he considers for publication. The Editor has a responsibility to protect the anonymity of reviewers as per the highest academic standards. The Editor will evaluate manuscripts for their intellectual content free from any racial, gender, sexual, religious, ethnic, or political bias.

Unpublished materials disclosed in a submitted manuscript must not be used in an editor’s own research without the express written consent of the author.

Authors' responsibilities

Authors warrant that their manuscripts are their original work that has not been published before and is not under consideration for publication elsewhere. Authors also warrant that the manuscript is not and will not be published elsewhere (prior and after the publication in the FME Transactions) in any language without the consent of the copyright holder.

It is posible that the selected papers from conferences organized by the Faculty of Mechanical Engineering of the University of Belgrade or the scientific institutions that cooperate with it on the joint European projects (such as Tempus, Adria-Hub, Horizon 2020, etc.) can be published in the FME Transactions journal after a complete reviewing process. The name of the conference and the name of the conference organizer should be clearly indicated in the Acknowledgment of the published paper. At the same time, the conference paper should be removed from the conference site if it is exposed in its entirety.

Authors warrant that the rights of third parties will not be violated, and that the publisher will not be held legally responsible should there be any claims for compensation.

Authors are exclusively responsible for the contents of their submissions, the validity of the experimental results and must make sure that they have permission from all involved parties to make the data public. Authors wishing to include figures or text passages that have already been published elsewhere are required to obtain permission from the copyright holder(s) and to include evidence that such permission has been granted when submitting their papers. Any material received without such evidence will be assumed to originate from the authors.

Authors must make sure that only contributors who have significantly contributed to the submission are listed as authors and, conversely, that all contributors who have significantly contributed to the submission are listed as authors.

Authors should ensure that they clearly cite, reference and acknowledge all instances where they have used or been influenced by the work of others, including their own previously published articles and research material.

It is the responsibility of each author to ensure that papers submitted to the FME Transactions are written with ethical standards in mind and that they do not contain plagiarism. Authors affirm that the article contains no unfounded or unlawful statements and does not violate the rights of others.

When an author discovers a significant error or inaccuracy in his/her own published work, it is the author’s obligation to promptly notify the journal Editor or publisher and cooperate with the Editor to retract or correct the paper.

Plagiarism

Plagiarism, where someone assumes another’s ideas, words, or other creative expression as one’s own, is a clear violation of scientific ethics. Plagiarism may also involve a violation of copyright law, punishable by legal action.

  • Word for word, or almost word for word copying, or purposely paraphrasing portions of another author’s work without clearly indicating the source or marking the copied fragment (for example, using quotation marks);
  • Copying equations, figures or tables from someone else’s paper without properly citing the source and/or without permission from the original author or the copyright holder.

Any paper which shows obvious signs of plagiarism will be automatically rejected.

Peer review

The submitted papers are subject to a peer review process (single-blind peer review). The purpose of peer review is to assist the Editor in making editorial decisions. Through the editorial communications with the author it may also assist the author in improving the paper.

The reviewers must not have conflict of interest with respect to the research, the authors and/or the funding sources for the research. If such conflicts exist, the reviewers must report them to the Editor without delay. Any selected referee who feels unqualified to review the research reported in a manuscript or knows that its prompt review will be impossible should notify the Editor without delay.

The reviews must be conducted objectively. Personal criticism of the author is inappropriate. The reviewers should express their views clearly with supporting arguments.

Any manuscripts received for review must be treated as confidential documents.

All of the reviewers of a paper remain anonymous to the authors before, during and after the evaluation process.

All of the reviewers of a paper act independently and they are not aware of each other’s identities. If the decisions of the two reviewers are not the same (accept/reject), the Editor may assign additional reviewers. The Editorial board shall ensure reasonable quality control for the reviews. With respect to reviewers whose reviews are convincingly questioned by authors, special attention will be paid to ensure that the reviews are objective and high in academic standard. When there is any doubt with regard to the objectivity of the reviews or quality of the review, additional reviewers will be assigned.

Open Access Policy

The FME Transactions is an Open Access Journal. All articles can be downloaded free of charge and used in accordance with the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 Serbia (http://creativecommons.org/licenses/by-nc-nd/3.0/rs/)

Copyright

The journal FME Transactions allows authors to deposit Author’s Post-print (accepted version) and Publisher’s version/PDF in an institutional repository and non-commercial subject-based repositories, such as arXiv or to publish it on Author’s personal website (including social networking sites, such as ResearchGate, Academia.edu, etc.) and/or departmental website, at any time after publication. Publisher copyright and source must be acknowledged and a link must be made to the article’s DOI.

Self-archiving Policy

Once the manuscript is accepted for publication, authors shall transfer the copyright to the Publisher. If the submitted manuscript is not accepted for publication by the journal, all rights shall be retained by the Author(s).

The Authors grant to the Publisher the following rights to the manuscript, including any supplemental material, and any parts, extracts or elements there of:

  • the right to reproduce and distribute the Manuscript in printed form, including print-on-demand;
  • the right to produce prepublications, reprints, and special editions of the Manuscript;
  • the right to translate the Manuscript into other languages;
  • the right to reproduce the Manuscript using photomechanical or similar means including, but not limited to photocopy, and the right to distribute these reproductions;
  • the right to reproduce and distribute the Manuscript electronically or optically on any and all data carriers or storage media – especially in machine readable/digitalized form on data carriers such as hard drive, CD-Rom, DVD, Blu-ray Disc (BD), Mini-Disk, data tape – and the right to reproduce and distribute the Article via these data carriers;
  • the right to store the Manuscript in databases, including online databases, and the right of transmission of the Manuscript in all technical systems and modes;
  • the right to make the Manuscript available to the public or to closed user groups on individual demand, for use on monitors or other readers (including e-books), and in printable form for the user, either via the internet, other online services, or via internal or external networks.
Aims and Scope

The journal FME Transactions publishes original papers (reviewing and contributed papers, and short communications) from all fields of Mechanical Engineering, which is, as a branch of Engineering, considered in the journal in its broadest possible sense. Thus, the articles are welcome from: Applied Mechanics, Fluids Engineering, Thermodynamics, Heat and Mass Transfer, Robotics, Material Science, Tribology, Combustion, Mechanical Design and Machine Dynamics, Productional, Industrial, Agricultural, Aerospace, Processing, Railway, Biomedical and Control Engineering, Mechanization, Hydro- and Thermo-power Systems, Internal Combustion Engines and Vehicle Dynamics, Energy Resources Technology, Military Technology, Naval Architecture, and Applied and Industrial Mathematics.

Theoretical, experimental and computational analyses of various problems of Mechanical Engineering are equally welcome and acceptable for publication. In addition, there will be published book reviews, announcements of symposia, and in special issues, proceedings of selected papers from symposia organized by the Faculty of Mechanical Engineering in Belgrade.

Reviewing papers will be published by invitation only. One volume consists of four numbers.

  • Paper category: M21 15 ECTS

    Explanation: Paper published in leading international journal

  • Paper category: M22 14 ECTS

    Explanation: Paper published in distinguished international journal

  • Paper category: M23 13 ECTS

    Explanation: Paper published in international journal

  • Paper category: M24 10 ECTS

    Explanation: Paper published in international journal verified by a special decision

  • Paper category: M51 10 ECTS

    Explanation: Paper published in leading national journal

  • Paper category: M52 8 ECTS

    Explanation: Paper published in national journal

  • Paper category: M33 6 ECTS

    Explanation: Presented paper published as a whole in proceedings of an international conference

  • Paper category: M34 4 ECTS

    Explanation: Presented paper published as an extract in proceedings of an international conference

The list of international journals can be accessed by using Kobson database at this link

If the paper has more than one author, the number of credit points is divided by n-1, where n is the number of authors. The total number of credit points gained for this activity cannot exceed, in sum, 40 points in all four reports, irrespective of the number of papers. The report must contain the title of the paper with all references and the number of credit points assigned.

Hydropower Engineering
1.1.5 Theory of turbomachinery
1.2.5 Pumps
2.1.5 Hydraulic turbines
2.2.5 Design of Pumps, fans and turbo compressors
2.3.5 Fans and turbocompressors
3.1.5 Hydropower plants and equipment
3.2.5 Hydraulic power transmitters
3.3.5 Hydropower measurements
4.1 Skill praxis M - HEN
4.3 Course of M.Sc. thesis
4.4 M.Sc. thesis

Within this study specialization, the students will obtain: fundamental knowledge in turbomachines; fundamental knowledge in fluid mechanics and thermodynamics; ability to design hydraulic and air systems (application of turbomachines); ability to design and construct turbomachines; knowledge in Computational Fluid Dynamics, scientific flow measurements, and industry flow measurements.

Thermal Science Engineering
1.1.5 Steam boilers elements and equipments
1.2.5 Refrigeration equipment
2.1.5 Steam boiler processing
2.2.5 Refrigeration systems
2.3.5 Air-conditioning fundamentals
3.1.5 Thermal power plants and heat plants
3.2.5 Heat pumps
3.3.5 Air conditioning systems
4.1 Skill praxis M - TTA
4.3 Course of M.Sc. thesis
4.4 M.Sc. thesis

The Thermal Science Engineering study curriculum provides the students with the skills required for Heating Ventilating and Air Conditioning and Refrigeration (HVAC&R) systems design and construction, for work in companies within the field of HVAC&R installations production, assembling, maintenance, and/or exploitation sectors, as well as for research and scientific work.

Material Handling, Constructions and Logistics
1.1.5 Facility layout and industrial logistics
1.2.5 Computer aided design in material handling practice
2.1.5 Structural and stress analysis
2.2.5 Transport and logistic systems design
2.3.5 Conveying and material handling machines
3.1.5 Mining and construction machines
3.2.5 Cranes design
3.3.5 Eco design
4.1 Skill praxis M - TKL
4.3 Course of M.Sc. thesis
4.4 M.Sc. thesis

Upon the completion of the specialization, students will: acquire proficiency and tools for dealing with the challenges of designing an efficient civil, mining or material handling and transportation system that include various calculation methods and theories, as well as the use of modern CAD software for creating 3D models, technical documentation or Finite Element Analyses (FEA); develop practical and theoretical knowledge and skills in the calculation and design of various types of civil and mining machines and systems: earthmoving machines, various kinds of cranes and excavators, conveyors, factories and warehouses, lifts and elevators, cable cars, and others.

Thermal Power Engineering
1.1.5 Steam turbines 1
1.2.5 Power steam boiler 1
2.1.5 Steam turbines 2
2.2.5 Thermal power plants 1
2.3.5 Gas turbines
3.1.5 Energy planning
3.2.5 Themal power plants 2
3.3.5 Steam generators
4.1 Skill praxis M - TEN
4.3 Course of M.Sc. thesis
4.4 M.Sc. thesis

The educational objectives of the programme are to produce graduates who can apply the principles of science and engineering and are knowledgeable in thermal and mechanical systems. The students are educated to understand and investigate the relationships between thermal processes and thermal power equipment, to apply integrated designs, to communicate effectively and to demonstrate the ability to function in multidisciplinary teams. Their skills include usage of modern engineering tools in design, investigation and analyses of processes, equipment and integral plants.

Weapon Systems
1.1.5 Physics of explosive processes
1.2.5 Flight dynamics and aerodynamic of projectiles
2.1.3 Missile propulsion
2.1.2 Fire control systems
2.2.3 Interior ballistics
2.2.2 Automatic weapons
2.3.2 Missile guidance and control
2.3.3 Projectile design
3.1.3 Artillery weapons design
3.2.5 Missile design and launchers
3.3.3 Terminal ballistics
3.3.2 Optical devices and optoelectronics
4.1 Skill praxis M - SIN
4.3 Course of M.Sc. thesis
4.4 M.Sc. thesis

Upon a successful completion of the study specialization in Weapon Systems, students will be able to design and develop classical and rocket weapon systems by applying advanced engineering principles and innovative solutions. They will acquire the ability to model, analyse, design, and test critical components of weapon systems, ensuring functionality, reliability, and performance under specified conditions. Graduates will be equipped to identify, analyse, and solve complex engineering problems related to weapon systems through systematic and evidence-based approaches. With advanced technical knowledge and skills, graduates will excel in the defence industry and research and development institutions, driving innovation and contributing to technological advancements. Furthermore, they will exhibit a strong commitment to professional ethics and values, incorporating normative and applied ethics into their engineering practices.

Control Engineering
1.1.5 Computer control
1.2.5 Automatic control
2.1.5 Dynamic systems modelling, identification and simulation
2.2.5 Nonlinear systems 1
2.3.5 Synthesis of linear systems
3.1.5 Fuzzy control systems
3.2.5 Industrial process control
3.3.5 Nonlinear systems 2
4.1 Skill praxis M - SAU
4.3 Course of M.Sc. thesis
4.4 M.Sc. thesis

After finishing the study specialization in Control Engineering, the graduates will have: the ability to develop the methodologies, algorithms and software for modelling, simulation, control and automation of complex apparatus and systems, and to apply them in different areas; knowledge and skills for the identification, prediction and control of complex systems, and for their applications in different fields of mechanical engineering.

Process Engineering and Environment Protection
1.1.5 Transport phenomena in process industry
1.2.5 Mechanical and hydromechanical operations and equipment
2.1.5 Heat transfer operations and equipment
2.2.5 Biotechnology
2.3.5 Chemical and biochemical operations and reactors
3.1.5 Design, construction and operation of processing systems
3.2.5 Mass transfer operations and equipment
3.3.2 Air pollution control
3.3.3 Waste and wastewater management
4.1 Skill praxis M - PTH
4.3 Course of M.Sc. thesis
4.4 M.Sc. thesis

Mechanical Engineers who graduate in the specialization area in Process Engineering and Environmental Protection will have knowledge and skills to successfully perform the activities and tasks in the field of: design and development of processes and complex facilities in process and other industries; design of process machines, devices and apparatus; preparation and production management; commissioning of process equipment, process lines and industrial plants; maintenance of technical systems; laboratory measurement, testing and certification of materials, products, machines and apparatus; and research and development in the field of theoretical and practical knowledge in process engineering and environmental protection.

Production Engineering
1.1.5 Manufacturing automation
1.2.5 Industrial robots
2.1.5 Manufacturing systems design
2.2.5 Computer integrated manufacturing systems and technology
2.3.5 Production information systems
3.1.5 New technologies
3.2.5 Quality management
3.3.5 Intelligent manufacturing systems
4.1 Skill praxis M - PRO
4.3 Course of M.Sc. thesis
4.4 M.Sc. thesis

The students graduating from this specialization will have the following specialization-specific learning outcomes: knowledge of production techniques related to a wide spectrum of machine tools, robots and robotic systems, automatic assembly systems, measurement and control machines, flexible manufacturing systems, tools, fixtures and other components and elements; knowledge of a wide range of different production technologies, including machining and assembly processes design and planning; knowledge of production cybernetics including manufacturing processes control systems, cyber-physical manufacturing systems, artificial intelligence in manufacturing, CAD, CAM, CAE systems in products and production design, and informational integration of production enterprises, as well as the ability for their design, development, implementation and maintenance.

Engineering graphics and mechatronics
1.1.5 Constructive processing of curves and surfaces
1.2.5 Constructive geometry and graphics
2.1.5 Engineering condition monitoring
2.2.5 Fundaments of mechanism analysis and synthesis
2.3.5 Applied mechatronics
3.1.5 Engineering graphics and simulations
3.2.5 Application of virtual and augmented reality in mechanical engineering
3.3.5 The aesthetics of 3d modelling
4.1 Skill praxis M - IGM
4.3 Course of M.Sc. thesis
4.4 M.Sc. thesis

The students graduating from this study specialization will have: knowledge on advanced methods and techniques of shaping, constructive processing, presentation – rendering and rapid prototyping of complex three-dimensional space objects in mechanical engineering and other branches of science and technology, including the theory of constructive projective geometry and aesthetics, as well as modern computer methods of practical modelling and display of positional and metric invariants of space using both classical technical documentation and virtual and augmented reality; knowledge on the structural, kinematic and dynamic characteristics of different types of classical mechanisms; knowledge and skills of design, simulation and motion analysis of classic mechanisms, primarily using modern software tools; ability to design modern, highly sophisticated devices and systems using synergy of mechanical engineering, electronics and modern information technologies; ability to model complex machine parts and assemblies using advanced CAD methods, improve the aesthetic characteristics of the modelled forms, present machine parts and assemblies with appropriate assembly and workshop drawings, design and analyse the movements of various types of mechanisms, perform simulation and analysis of the movement of projected mechanisms, present complex three-dimensional forms using methods and techniques of virtual and augmented reality, and install mechatronic systems.

Internal Combustion Engines
1.1.5 Еngine working processes
1.2.5 Mixture formation and combustion in IC engines
2.1.5 IC engine design 1
2.2.5 Internal combustion engine mechatronics
2.3.5 Supercharging of IC engines
3.1.5 IC engine design 2
3.2.5 IC engine testing
3.3.2 Еngine design project
3.3.3 Ecology of mobile power sources
4.1 Skill praxis M - MOT
4.3 Course of M.Sc. thesis
4.4 M.Sc. thesis

The students who graduate from this study specialization will have knowledge for systematic understanding of the Internal Combustion Engine (ICE) processes and ICE and hybrid power units and powertrains, thermodynamics and heat transfer, fluid mechanics, fuel mixture formation, combustion products formation and combustion chemical kinetics; systematic understanding of reciprocating piston machines components and systems operation and work-flow in system design (forces, loads, strength, tribology); systematic understanding of ICE and hybrid powertrains energy flows, overall efficiency and methods for optimization of the ICE and hybrid power source system components layout and control; critical awareness of current problems and new insights in the field of ICE  based power sources – energy efficiency, environmental impact, social impact, maintenance, cost-effectiveness etc; systematic understanding of measurement in mechanical systems, particularly measurement techniques in ICE; systematic understanding of ICE wear, maintenance, reliability and diagnostics. They shall have skills in the design of mechatronic systems (system setup, evaluation of components like sensors, actuators and embedded systems); in designing measurement chains for steady and dynamic measurements in ICE and hybrid powertrain systems with a focus on reciprocating piston machines, organizing and performing testing procedures, evaluation and critical analysis of measurement results; in designing of simulation models and analysis of energy and exergy efficiency of reciprocating piston machines processes (ICE and piston compressors), as well as of hybrid powertrains; in designing, analysis and numerical simulation of ICE charging and mixture formation system; in designing of reciprocating piston machines elements and systems, and performing multi-criterion analysis and evaluation of system design and performance; in analysis and optimization of the internal logistics of ICE and hybrid powertrains maintenance systems, organizing and performing maintenance and diagnostic procedures and in preparing, writing and presenting technical reports.

Motor Vehicles
1.1.5 Modelling of vehicle systems
1.2.5 Vehicle layout, suspension and steering
2.1.5 Vehicle transmission systems
2.2.5 Friction based vehicle systems
2.3.5 Vehicle mechatronics
3.1.5 Vehicle body structure
3.2.5 Vehicle testing
3.3.5 Intelligent vehicle systems
4.1 Skill praxis M - MOV
4.3 Course of M.Sc. thesis
4.4 M.Sc. thesis

After finishing this study specialization, students will be able to: identify all necessary requirements that vehicle systems must meet during the design and operational phases; analyse existing solutions for vehicle systems and assemblies to apply or modify them for use in another vehicle; determine the loads to which vehicle systems are exposed; apply acquired knowledge through independent design of an appropriate vehicle system for a given design task; have the ability to carry out systematic approach in the process of vehicle’s and/or its components’ development; use modern engineering tools; design machine elements on the basis of reliability; analyse the operation of hybrid and electric vehicles; identify environmentally friendly and modern materials used in vehicle design and manufacturing; understand and implement basic mechatronic systems on the vehicle; organize and perform some of the vehicle testing procedures; analyse the impacts related to vehicle reliability and maintenance.

Mechanical Engineering & Information Technology
1.1.5 С/С++
1.2.5 Object oriented paradigm
2.1.5 Algorithms and data structures
2.2.5 Programmable control systems
2.3.5 Data exquisite in mechanical engineering
3.1.5 Engineering software design
3.2.5 Optimization methods
3.3.5 Numerical methods in continuum mechanics
4.1 Skill praxis M - MIT
4.3 Course of M.Sc. thesis
4.4 M.Sc. thesis

After graduating from this study specialization, students will be able to: utilize advanced equipment and information technology in a broad range of fields from product development to the design of information services; integrate mechanical engineering, including equipment design, manufacturing, and processing technology, with information engineering; develop new products which consist of mechanical elements, sensors, actuators and software; demonstrate the knowledge in products’ manufacturing, control theory, computer control of machines, equipment control, as well as in information-related topics such as knowledge processing, and the Internet; create viable computer models; develop simulation software and the software applications which support enterprise business.

Mechanics
1.1.5 Analytical mechanics
1.2.5 Continuum mechanics
2.1.5 Theory of elasticity
2.2.5 Fluid mechanics 1
2.3.5 Computational fluid mechanics
3.1.5 Mechatronic robotics
3.2.5 Multiphase flow M
3.3.5 Theory of finite element method
4.1 Skill praxis M - MEH
4.3 Course of M.Sc. thesis
4.4 M.Sc. thesis

After a successful completion of courses, students will be able to apply the acquired knowledge for:

• the design, production and maintenance of rigid mechanical systems, such as ideal mechanisms, robotic systems, mechanical control systems, mechatronics systems;

• the design, production and maintenance of deformable mechanical systems and struc-tural analysis of deformable structures; finite element and vibration analysis of struc-tures;

• the design, production and maintenance of equipment which involves flow processes: pipelines, flow machines, tube transport of fluids and solid materials, multiphase flow; analysis by using computational fluid dynamics (CFD).

Industrial Engineering
1.1.5 Operations research
1.2.5 Engineering statistics
2.1.5 Industrial logistic
2.2.5 Ergonomic designing
2.3.5 Database systems
3.1.5 Production and operations management 2
3.2.5 Organization design
3.3.5 Industrial management
4.1 Skill praxis M - IIE
4.3 Course of M.Sc. thesis
4.4 M.Sc. thesis

The specialization’s curriculum is programmed to provide students with the knowledge and skills required by modern industrial engineers, and specialization-specific outcomes such as: being able to formulate, analyse and solve planning, organizing and management problems in the enterprise; create and apply solutions for the design of organizational systems; apply statistical methods and operational research methods in academic and industrial environments; design and apply risk, quality and maintenance management systems; design ergonomically adjusted machines, tools, products and complex systems; design logistics systems and processes; apply industrial engineering methods in management information systems and design knowledge bases; apply industrial management methods; apply project appraisal methods; apply Lean and 6-Sigma approach; develop effective communication methods and management skills for an individual or a team in a multidisciplinary environment. The graduates are systems, lean, and sustainability thinkers, who have the technological, digital, and transversal skills to face the current and future challenges.

Agricultural and food engineering
1.1.5 Tractors and self-propelled agricultural machines
1.2.5 Refrigeration in food technologies
2.1.5 Design of agricultur machines and equipment
2.2.5 Design of mechanisms and manipulators in the food industry
2.3.5 Drying process techniques and technologies
3.1.5 Software tools in design in mechanical engineering
3.2.5 Geoinformation and remote control of biotechnic systems
3.3.5 Design of plants and process and energy systems
4.1 Skill praxis M - PPM
4.3 Course of M.Sc. thesis
4.4 M.Sc. thesis

After successfully completing this specialization, the graduates will have: well-rounded knowledge and understanding of mechanical and agricultural engineering principles and practices and their bases in science and mechanics, together with understanding of the global and societal impacts of food technology; capability of designing, constructing, and researching agricultural machinery, facilities, and food processing equipment, as well as maintaining them; ability to adapt to the changing needs of industry and agricultural praxis; ability to impart the essential professional, ethical, and moral values required in engineering practice and food production.

Welding and Welded Structures
1.1.3 Engineering materials 3
1.1.2 Fuel, lubricants and industrial water 2
1.2.5 Design of welded structures
2.1.5 Welding metallurgy
2.2.5 Machine design and construction M
2.3.5 Fracture mechanics and structural integrity
3.1.5 Design, construction and operation of processing systems
3.2.5 Optimization and reliability of constructions
3.3.5 Welding technology
4.1 Skill praxis M - ZZK
4.3 Course of M.Sc. thesis
4.4 M.Sc. thesis

The students graduating from this study specialization will have the following learning outcomes: ability to design welded structures, components or welding processes (including the conventional, unconventional and the related processes) to meet the desired needs; knowledge of contemporary issues in design, evaluation, reliability and structural integrity analyses of welded structures; profound knowledge of engineering materials and their behaviour during exploitation and welding; ability to model, analyse, fabricate and maintain welding structures, components and processes with a special emphasis on non-destructive testing methods and in-service behaviour; ability to carry out failure analysis and welding procedure specifications and to assess the behaviour of welded joints in the conditions of creep, fatigue, friction, wear, and corrosion.

Railway Mechanical Engineering
1.1.5 Rail vehicles 1
1.2.5 Theory of traction
2.1.5 Locomotive 1
2.2.5 Rail vehicles 2
2.3.5 Brakes of rail vehicles
3.1.5 Locomotive 2
3.2.5 Railway vehicles maintenance
3.3.5 Fundamentals of rail vehicle dynamics
4.1 Skill praxis M - ZEM
4.3 Course of M.Sc. thesis
4.4 M.Sc. thesis

General intended learning outcomes for students, expected after the completion of the Railway Mechanical Engineering specialization, include the following abilities: to explain the basic concepts of functioning of different types of rail vehicles; to apply appropriate regulations and standards in the field of railway mechanical engineering to solve different engineering problems; to use computer techniques, skills and modern engineering software and tools necessary for the development, design, production, testing, and maintenance of rail vehicles; to apply computational methods for determining the main parameters of the dynamic behaviour of the rail vehicles; to analyse and compare tractive characteristics of different types of power transmissions and calculate the key parameters; to solve practical problems of maintenance of railway vehicles related to the organization and implementation of the projected activities, as well as implementation of knowledge in the field of reliability, information and expert systems.

Design in Mechanical Engineering
1.1.5 Structure modelling with calculation
1.2.5 Innovative design of technical systems
2.1.3 Ergonomic design
2.1.2 Bionics in design
2.2.5 Machine design and construction M
2.3.5 Decision-making methods
3.1.5 Software tools in design in mechanical engineering
3.2.5 Optimization methods
3.3.5 Eco design
4.1 Skill praxis M - DUM
4.3 Course of M.Sc. thesis
4.4 M.Sc. thesis

Every graduate of the Design in Mechanical Engineering programme will be able to: demonstrate knowledge of the engineering design methodology and product development in engineering; identify, analyse, and solve technical problems in the areas of machine design such as ergonomic aspects, ecological aspects, aesthetics; demonstrate knowledge in transformation of biological systems, decision making, calculation and special methods in design application; knowledge in application of experimental results, in using the principles of calculus, and appropriate computer technology; apply creativity in the design of systems, components, or processes.

Aerospace Engineering
1.1.5 Applied aerodynamics
1.2.5 Computational aerodynamics
2.1.5 Structural analysis
2.2.5 Flight dynamics
2.3.5 Composite structures
3.1.5 Aircraft control and systems
3.2.5 Aircraft propulsion
3.3.5 Aircraft design
4.1 Skill praxis M - VAZ
4.3 Course of M.Sc. thesis
4.4 M.Sc. thesis

The goals of the Aerospace Engineering programme are:

  • to provide comprehensive aeronautical engineering education that develops in students the fundamental skills necessary for the design, analysis, synthesis and research of aircraft, spacecraft and other high technology flight systems, and
  • to prepare students for various professions in aeronautical engineering and related fields by developing in them the attributes needed to make significant contributions to the society and to the engineering community, both now and in the future.

The educational objectives of the Aerospace Engineering programme are to produce graduates whose expected acquired skills, competences and knowledge should be sufficient to ensure their successful careers in industry, private practice or government, or to enable them to pursue advanced postgraduate studies. Graduates of this department will be skilled practitioners who apply their knowledge and technical skills to solve relevant engineering problems both in the aeronautical or related professions.

Naval Architecture
1.1.5 Ship resistance
1.2.5 Ship strength 1
2.1.5 Ship propulsion
2.2.5 Ship buoyancy and stability 2
2.3.5 Ship structures 2
3.1.5 Ship design
3.2.5 Seakeeping
3.3.3 Marine engines
3.3.2 Application of methods and techniques of industrial engineering in shipbuilding
4.1 Skill praxis M - BRO
4.3 Course of M.Sc. thesis
4.4 M.Sc. thesis

The main goal of this study specialization is to provide advanced education and graduate engineers qualified to work successfully in the field related to various aspects of ships. The students graduating from this study specialization shall have knowledge in ship geometry, hydrostatics and stability; ship structures and strength, including numerical methods in ship structural design; ship hydrodynamics (resistance, propulsion, manoeuvring and seakeeping); computer aided ship design; computational fluid dynamics (CFD) applied to ship hydrodynamics; ship equipment and systems; high speed crafts; aero-hydrodynamics of sailing vessels; ship production; etc. They will be fully skilled for the design, construction, and/or repair of ships and boats, including: merchant ships (oil/gas tankers, cargo ships, bulk carriers, container ships), passenger/vehicle ferries, high speed craft, yachts (power boats and other recreational craft), various kinds of floating structures, etc.

Biomedical Engineering
1.1.5 Spectroscopy methods and techniques
1.2.5 Biomedical instrumentation and equipment
2.1.5 Clinical engineering
2.2.3 Biomechanics of tissue and organs
2.2.2 Introduction to nanotechnology
2.3.5 Signal processing
3.1.5 Nanotechnology
3.2.5 Early diagnostics
3.3.5 Nanomedical engineering
4.1 Skill praxis M - BMI
4.3 Course of M.Sc. thesis
4.4 M.Sc. thesis

The educational programme at the department of Biomedical Engineering provides students with the analytical tools to understand how biological systems operate and to apply engineering principles to resolve medical and biological problems. Through mandatory and elective MSc courses, students gain knowledge in different fields such as tissue mechanics, signal processing, biomedical devices, nanotechnology, and get practical experience in the organization and functioning of the environment in which they will apply their knowledge in the future professional career. Combining theoretical and practical work, students learn to use and maintain modern equipment and perform applied research in biomedical engineering. There is an intensive collaboration between teaching staff of the department of Biomedical Engineering and doctors, biologists, chemists and engineers working in medical facilities and companies, which allow our students to conduct research, improve the existing and develop novel devices, materials and diagnostic methods through their Master’s thesis. Competences of graduates in biomedical engineering include the invention of new methods, device improvement, equipment maintaining and applying information technologies in clinics.